1. Description:
Castor Oil Polyglycidyl Ether Molecular formula: C66H116O12
CAS Number: 74398-71-3
Physical and Chemical Character: Colorless to slight yellow Transparent Liquid,
flash burning point: ＞93℃
2. Technical Data Sheet (TDS)
|
Specifications |
Unit |
HW-966 |
|
Color |
APHA |
-- |
|
Viscosity |
mPa.s (25℃ ) |
150-450 |
|
Epoxy Equivalent Weight |
g/eq |
400-667 |
|
Epoxy Value |
Eq/ 100g |
0. 15-0.25 |
|
Hydrolyzable Chloride |
% |
≤ 1.50 |
|
Inorganic Chlorine |
mg/kg |
≤ 50 |
|
Moisture content |
% |
≤ 0 1 |
3. Application
It is a kind of low poly epoxy resin. The epoxy formulation is flexible, and has shock resistance and heat shock resistance. To be used with standard BPA epoxy resin, low vapor pressure and moderate smell. It can improve the product in the content in the formula, reduce the viscosity and extend its shelf-life. After curing, it can eliminate the stress.
To be used as the component of the concrete pavement, floor coating, adhesive, bridge decoration component and electrical potting compound.
4. Packing
- Packed in 25 kg/barrel or 200 kg/barrel, or 1000kgs/ IBC container.
- Storage and transportation must conform to basic requirements of normal chemicals.
- Store in a cool, dry and well ventilated area. Keep away from ignition sources, heat and flame and sunlight.
- It is necessary to maintain insulated (tightly seal) after use, in order to avoid negative influence arousing from moisture absorption.
5. Please note that all information provided by Wuhan Honrel Chemical Technology Co.,Ltd is considered accurate in certain condition. However we will not promise or bear any legal responsibility due to factors in producing and processing products. The customer should test applicability of our products fully before using it.
